12V COB LED Strip Light - 5m Roll, 320 LEDs/m, 12W/m, CRI 80+, 8mm Width

Transform Your Space with Seamless, Dot-Free Illumination

Upgrade your lighting with our High-Density 12V COB LED Strip Lights. Unlike traditional SMD strips that leave "hot spots" or visible dots, COB (Chip on Board) technology creates one continuous, smooth beam of light. Whether you’re illuminating kitchen under-cabinets, accenting a media room, or lighting up a retail display, this 5-meter roll provides a professional, "neon-like" finish every time.

Why Choose Our COB LED Tape?

• True Color Accuracy (CRI 80+): See colors as they were meant to be seen. With a Color Rendering Index of 80+, this strip is perfect for closets, art galleries, and vanity mirrors where color precision matters.
• Ultra-Slim 8mm Profile: The narrow 8mm width allows for a discrete installation in even the tightest aluminum channels or furniture grooves.
• High Density, Low Heat: Packed with 320 LEDs per meter, you get maximum brightness (12W/m) without the concentrated heat of older models, extending the lifespan of your lights.
• Effortless Installation: Featuring a pre-applied high-bond double-sided tape, these strips stick firmly to clean surfaces. Simply peel, stick, and connect to a 12V power source.

Feature	Specification
LED Density	320 LEDs per Meter
Voltage	12V DC
Power Consumption	12 Watts / Meter
Length	5 Meters (16.4 ft) per Roll
Width	8mm (Slim Design)
Color Rendering	CRI > 80
Adhesive	Industrial Strength Double-Sided Tape
Cuttable	Yes (Every few centimeters)
Operating Temperature	-20℃-+60℃
Color	Warm White 2800K

Frequently Asked Questions (FAQ)

Q1: Do I need a specific driver for these COB strip lights? A: Yes. These strips operate at 12V DC. You must use a 12V LED driver (transformer) to convert your home's 230V AC power. For safety and longevity, we recommend choosing a driver with at least 20% extra wattage capacity (e.g., for a 5-meter roll at 60W, use an 80W or 100W driver).

Q2: Can I cut the strip to fit my wardrobe size?

A: Definitely! Our COB strips feature designated cutting points (at every 2.5cm) marked with copper pads. Simply cut along the line with standard scissors to achieve the perfect fit for your shelving.

Q3: Will I see "dots" or "hotspots" on my wardrobe surface?

A: No. That is the primary advantage of COB (Chip on Board) technology. With 320 LEDs per meter, the light is emitted as a continuous, seamless glow, making it perfect for reflective surfaces like marble or polished wood where traditional LEDs often look patchy.

Q4: Can I dim these lights for a "night mode" in my bedroom?

A: Yes, these strips are fully dimmable. However, you will need a dimmable 12V driver or a standard 12V driver paired with a secondary controller/remote. Check our store for the compatible dimmer

Q5: Does the adhesive tape work on all surfaces?

A: Our strips come with high-bond double-sided tape. For best results on wardrobe wood or laminate, clean the surface with alcohol first to remove dust and oils. For permanent professional installs, we recommend mounting them inside an 8mm Aluminum Profile.